WARN(沃恩)电动绞盘

9.5xp 9.5ti 9.5ti Portable 9.5si
16.5ti M15000 M12000
XD9000i XD9000i Portable XD9000 M8274-50 M8000 M6000 M6000 SDP Portable

 
 

WARN(沃恩)9.5xp电动绞盘,全重39.5kg,采用6hp直流电机,单线拉力9500磅(4310公斤力),遥控操作距离3.7m,直径8mm钢缆长30m。正常使用至少需要650 CCA(冷起动电流)的电池供应。整机体积577mm L. x 160mm D. x 196 mm H

The fast, powerful WARN 9.5xp is designed for the serious off-roader who demands a winch that will perform under the most extreme conditions in the world. With 9,500 lbs. of pulling power, the longest duty cycle and fastest line speed of any WARN winch under load, the 9.5xp delivers extreme performance that eats up the competition-even in competition.

The 9.5xp winch features an all new, High Output Parallel Series Wound winch motor that's the strongest and most durable in the industry. The 6 hp motor, 3-stage planetary gearing and continuous duty control pack work in sync to tackle the most demanding pulls. Full face contact drum seals, motor and end housing gaskets deliver extreme-duty water resistance. A high gloss, chip resistant powder coat finish over chromate coated alloys affords superior corrosion resistance.

Part Number: PN 68500 (12V DC)
Rated Line Pull: 9500 lbs. (4310 kgs.) single-line
Motor: 12V 6 hp, High Output Parallel Series Wound
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear Ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Wire Rope: 100', 5/16" diameter (30m, 8mm diam.)
Fairlead: Roller
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72" (1.83m)  
Finish: Chromate with high-gloss dark gray powder coat
Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 87 lbs. (39.5 kgs.)  

Line Pull
Lbs.(Kgs.)
Line Speed
FT./min(M/min.)
Motor
Current
Pull by layer
layer/Lbs(Kgs.)
0 38(11.6) 70 amps 1/9500(4313)
2000(910) 16.8(5.1) 175 amps 2/8650(4927)
4000(1818) 12.8(3.9) 262 amps 3/7920 (3595)
6000(2720) 10.1(3.1) 335 amps 4/7400(3359)
8000(3630) 8.8(2.7) 425 amps 5/6940(3150)
9500(4310) 7.6(2.3) 480 amps

Above performance specs are based on first layer of drum


Winch Dimensions: 22.7" L. x 6.3" D. x 7.7" H. (577mm L. x 160mm D. x 196 mm H)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
  
           

货到付款(cash on delivery)
分享您的故事,免费赢取绞盘!

·电子邮件: 在线咨询
·自动传真:86-28-85071029、87712435
·销售热线:86-28-88835485、18981712702、13088061318
·商务合作:18981781178
·营销支持:维金商务资讯 | 欣宇时代